稀释磁性半导体Sn1-xMnxO2的室温铁磁性

采用固相反应法，制备了不同成分的稀释磁性半导体Sn_1-xMn_xO ₂(x=002，004，006)．利用x射线衍射和傅里叶变换红外光谱法证明 了锰均匀地掺杂到二氧化锡中．在室温下研究了掺锰二氧化锡基稀释半导体的磁性，发现它具有明显的铁磁性 ，同时对磁性的强弱与锰的含量和烧结温度的关系作了研究． 关键词： 稀释磁性半导体 掺杂 烧结 铁磁性 1-xMn_x O₂')" href="#">Sn_1-xMn_x O₂     

PROPAGATION OF SURFACE ACOUSTIC WAVES IN PRESTRESSED ANISOTROPIC LAYERED PIEZOELECTRIC STRUCTURES

The propagation of surface acoustic waves in layered piezoelectric structures withinitial stresses is investigated.The phase velocity equations are obtained for electrically free andshorted cases,respectively.Effects of the initial stresses on the phase velocity and the electrome-chanical coupling coefficient for the fundamental mode of the layered piezoelectric structures arediscussed.Numerical results for the c-axis oriented fihn of LiNbO_3 on a sapphire substrate aregiven.It is found that the fractional change in phase velocity is a linear function with the ini-tial stresses,and the electromechanical coupling factor increases with an increase of the absolutevalues of the compressive initial stresses.The results are useful for the design of surface acousticwave devices.     

共轴均匀带电薄圆盘间的相互作用力

本文利用静电场的高斯定律和环路定律巧妙地求出了均匀带电圆盘在空间任一点所产生的电场 ,进而计算出了共轴均匀带电薄圆盘之间的相互作用力     

温度对PSⅡCP4 7/D1/D2/Cytb559复合物荧光光谱特性的影响

采用激励光源为514.5 nm的分幅扫描单光子计数荧光光谱装置对经20℃、42℃和48℃不同温度处理后的反应中心复合物CP47/D₁/D₂/Cyt b559的荧光光谱特性进行了研究.经解析,获得不同温度处理后,CP47/D₁/D₂/Cyt b559复合物最大峰值未发生变化,均在682 nm,说明Chla670的能量都由Chla682接收,但损耗愈来愈小,在48℃时,损耗程度最小,而其荧光百分比未发生多大变化.振动副带～700 nm和～740 nm的中心波长都发生蓝移,在不同温度下分别为:20℃ 703 nm,749 nm;42℃ 697 nm,744 nm;48℃ 694 nm,740 nm.因此可以推测温度的升高,影响了CP47/D₁/D₂/Cyt b559色素蛋白的二级结构以及色素分子的空间位置,使最大峰值处的荧光强度逐渐降低,振动副带逐渐蓝移.42℃的温度已造成影响,48℃影响较大.     

Polytetrafluoroethylene and metal structure convective-flow CO laser

A convective flow CO laser composed of polytetrafluoroethylene discharge tubes, nickel–chromium steel components, a cupric heat exchanger and other components is described. Operating in liquid nitrogen condition, output power of 60 W has been obtained from a non-selective cavity.     

Scalable total synthesis of horsfiequinone A

Starting from two commercially available substrates, methoxyhydroquinone and piperonyl alcohol, a scalable four-step total synthesis of horsfiequinone A was developed. The notable feature of the synthesis is the application of two continuous sequential transformations. Namely, the key aldehyde 9 and horsfiequinone A were prepared via scalable Wittig/hydrolysis and Wittig/catalytic hydrogenation/oxidation sequences, respectively. Importantly, the synthetic route required only three recrystallizations and one column chromatography purification step.     

Environment-friendly bio-materials based on cotton-carbon aerogel for strontium removal from aqueous solution

Cotton carbon aerogel was prepared and used as a new water-insoluble adsorbent to remove strontium from aqueous solution. A comprehensive study on adsorption of strontium by cotton carbon aerogel was conducted regarding the effects of initial pH, temperature, initial strontium concentration, and contact time. The adsorbent was characterized by SEM. The results of regression analysis indicated that the adsorption process largely depends on the pH and temperature. The optimum pH range for adsorption process is 5–7. The maximum removal efficiency of strontium from aqueous solution was 60.16%. Moreover, cotton carbon aerogel adsorbent has good reusability before the fifth reuse.     

An Aluminum–Sulfur Battery with a Fast Kinetic Response

The electrochemical performance of the aluminum‐sulfur (Al‐S) battery has very poor reversibility and a low charge/discharge current density owing to slow kinetic processes determined by an inevitable dissociation reaction from Al₂Cl₇^? to free Al³⁺. Al₂Cl₆Br^? was used instead of Al₂Cl₇^? as the dissociation reaction reagent. A 15‐fold faster reaction rate of Al₂Cl₆Br^? dissociation than that of Al₂Cl₇^? was confirmed by density function theory calculations and the Arrhenius equation. This accelerated dissociation reaction was experimentally verified by the increase of exchange current density during Al electro‐deposition. Using Al₂Cl₆Br^? instead of Al₂Cl₇^?, a kinetically accelerated Al‐S battery has a sulfur utilization of more than 80 %, with at least four times the sulfur content and five times the current density than that of previous work.     

Introducing Fe2+ into Nickel–Iron Layered Double Hydroxide: Local Structure Modulated Water Oxidation Activity

Exploring materials with regulated local structures and understanding how the atomic motifs govern the reactivity and durability of catalysts are a critical challenge for designing advanced catalysts. Herein we report the tuning of the local atomic structure of nickel–iron layered double hydroxides (NiFe‐LDHs) by partially substituting Ni²⁺ with Fe²⁺ to introduce Fe‐O‐Fe moieties. These Fe²⁺‐containing NiFe‐LDHs exhibit enhanced oxygen evolution reaction (OER) activity with an ultralow overpotential of 195 mV at the current density of 10 mA cm^?2, which is among the best OER catalytic performance to date. In‐situ X‐ray absorption, Raman, and electrochemical analysis jointly reveal that the Fe‐O‐Fe motifs could stabilize high‐valent metal sites at low overpotentials, thereby enhancing the OER activity. These results reveal the importance of tuning the local atomic structure for designing high efficiency electrocatalysts.     

Synthetic Studies on Camptothecins. Part 1

A six‐step asymmetric total synthesis of (20S)‐camptothecin ( 1 ) has been accomplished in 25% overall yield starting from the known pyridone 3 . The key steps in this synthesis are the chemoselective Ni‐catalyzed hydrogenation of 3‐cyanopyridone 6 to 3‐formylpyridone 7 in AcOH/pyridine/H₂O and the Davis asymmetric hydroxylation of tricyclic lactone 4 utilizing a chiral N‐sulfonyloxaziridine into (4′S)‐tricyclic hydroxylactone 2 .